Ryobi CFS1502 Instrukcja Operatora Pobierz pdf (Strona 10)

OPERATION

ATTACHING HOOK AND LOOP SANDING

SHEETS

See Figure 2.

n Unplug the sander.

n Align holes in hook and loop type sanding sheet with holes

in pad, then carefully press fuzzy side of the sanding sheet

against pad as tightly as possible.

Note: Hook and loop type sanding sheets can be

reused for the life of the sanding abrasive. It is rec-

ommended that you keep the sanding sheet back-

ing clean to provide for best adhesion. Clean the

sheet and hook and loop pad by brushing lightly

with a light brush.

Fig. 2

Fig. 4

Fig. 3

WARNING:

Keep your head away from the sander and sanding area.

Hair could be drawn into sander causing serious injury.

�n Hold the sander in front and away from you, keeping it

clear of the workpiece.

TURNING THE SANDER ON/OFF

See Figure 4.

While holding the tool in normal operating position,

�n Push the ON/OFF switch to the left to turn sander on.

�n Push the ON/OFF switch to the right to turn sander off.

OPERATING THE SANDER

See Figures 5 - 6.

WARNING:

Unsecured workpieces could be thrown towards the

operator, causing injury.

�n Secure the workpiece to prevent it from moving under

the sander.

ATTACHING THE DUST BAG

See Figure 3.

The dust bag provides a dust collection system for the sand-

er. Sanding dust is drawn up through the holes of the sanding

sheet and collected in the dust bag during sanding.

n Unplug the sander.

�n Using a slight twisting motion, firmly slide dust bag as-

sembly over blower exhaust on sander.

HOOK AND LOOP

PAD

SANDING SHEET

DUST BAG

BLOWER EXHAUST

ON/OFF SWITCH

CAUTION:

Keep the cord away from the sanding pad and position

the cord so that it will not be caught on lumber, tools, or

other objects during sanding.

1 2 ... 5 6 7 8 9 10 11 12 13 14

Komentarze do niniejszej Instrukcji

Brak uwag

Ryobi CFS1502 Instrukcja Operatora Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Elektronarzędzia Ryobi CFS1502