Ryobi D46C Instrukcja Operatora

Przeglądaj online lub pobierz Instrukcja Operatora dla Elektronarzędzia Ryobi D46C. Ryobi D46C Operator`s manual Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 16
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
OPERATOR’S MANUAL
3/8 in. DRILL
DOUBLE INSULATED
D46C
Your drill has been engineered and manufactured to our high standard for dependability, ease of operation, and operator
safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Przeglądanie stron 0
1 2 3 4 5 6 ... 15 16

Podsumowanie treści

Strona 1 - OPERATOR’S MANUAL

OPERATOR’S MANUAL 3/8 in. DRILL DOUBLE INSULATED D46C Your drill has been engineered and manufactured to our high standard for dependability, ease of

Strona 2 - WARRANTY

10DIRECTION OF ROTATION SELECTOR(FORWARD/REVERSE)See Figure 2.The direction of bit rotation is reversible and is controlled by a selector located abov

Strona 3 - GENERAL SAFETY RULES

11OPERATIONINSTALLING BITSSee Figure 5 - 6. Unplug the drill. Open or close the chuck jaws to a point where the open-ing is slightly larger than t

Strona 4 - SPECIFIC SAFETY RULES

12OPERATIONTO INCREASETORQUEFig. 8 TO DECREASETORQUETORQUE ADJUSTMENT RINGADJUSTABLE TORQUE CLUTCHSee Figure 8.This product is equipped with an

Strona 5 - DESIGNATION/EXPLANATION

13WARNING:When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.WAR

Strona 6 - SAVE THESE INSTRUCTIONS

14MAINTENANCEFig. 10 Fig. 11Fig. 12SCREWDRIVERHEX KEYKEYLESSCHUCKMALLETCHUCK JAWSCHUCK REMOVAL See Figures 10 - 12.The chuck may be removed and replac

Strona 8 - FEATURES

16ONE WORLD TECHNOLOGIES, INC.1428 Pearman Dairy Road, Anderson, SC 29625Phone 1-800-525-2579www.ryobitools.com983000-80801-09-05 (REV:00)• SERVICENo

Strona 9 - ASSEMBLY

2TABLE OF CONTENTS Introduction ...

Strona 10 - OPERATION

3GENERAL SAFETY RULESWARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fir

Strona 11

4SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may resu

Strona 12

5SYMBOLSSome of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will

Strona 13 - MAINTENANCE

6The following signal words and meanings are intended to explain the levels of risk associated with this product.DANGER:Indicates an imminently hazard

Strona 14

7EXTENSION CORDSWhen using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to h

Strona 15

8FEATURESFig. 1PRODUCT SPECIFICATIONSChuck ...... 3/8 in.Switch ...

Strona 16 - in. DRILL

9WARNING: If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could res

Komentarze do niniejszej Instrukcji

Brak uwag